Quality is a many splendored thing
In my kitchen is a water thermos I plug in to heat water, usually for tea. It heats water to boiling and then auto shuts off and keeps it warm. It boils the water in about 45 seconds: Super-fast.
I love this appliance because it works so well. It doesn’t impact my life proportionally because I don’t drink enough tea, but I really respect this appliance. It’s tough, resilient and just flat out works.
I really like that appliance. It exceeded my expectation.
Exceeding expectations
New front doors are expensive. Cheap door systems are cheap. They don’t work well and usually are replaced in a few years.
Good doors cost more and to install them right costs. Remember, anything with a hinge is a more difficult install. Uneven weight distribution and constant use requires a great door and a dedicated carpenter to make it Perfect.
If you’re considering getting a new front door, take your time and get the right one. Price is always paramount when you’re considering the purchase, but 1 year from now the price will seem a lot less important. Five years from now it will be irrelevant.
At LEGACY we support such fenestration organizations as NFRC and AAMA. Between the two they provide the window and door manufacturing industry with standards in structural and thermal excellence. This enables consumers to make good choices.
We also believe in an informed consumer. When the expectations of the homeowner and the general contractor are the same, the result is a “WOW I love it” homeowner response.
As a member of Consumer Reports I have reprinted with their permission the January 2011 article on types of entry doors. This includes fiberglass, steel and wood.
Please call or email us and discuss your door options.
Make Your Home Perfect one Project at a Time
Mark Spencer
Owner
Entry door Options
Consumer Reports. Reprinted with permission.
Getting started
We’ve found that most entry doors perform well overall. But the materials they’re made of–fiberglass, steel, and wood–each have strengths and weaknesses. And while a low-priced steel door can be the equal of a wood or fiberglass door costing five times as much, it’s not the best choice for wear and tear.
Going online
Whether you buy at a store or online, you’ll save time by doing some research online and at least visiting a store to truly see what you’re buying. Manufacturer sites describe materials and offer catalogs, and can help you to find a local retailer. And even if you don’t see the exact door you want, a similar model can give you a good idea of construction and finish.
Energy efficiency
Steel and fiberglass doors typically have more insulating value than wood doors. Models that are Energy Star-qualified must be independently tested and certified, and often boast tighter-fitting frames, energy-efficient cores, and, for models with glass, double- or triple-panel insulating glass to reduce heat transfer. You’ll find more details on the federal EPA’s EnergyStar website. But you may not save as much as you think, since doors are a small part of the surface area of a house and typically don’t allow significant amounts of warm air to escape. What’s more, heat is generally lost through air leaks around the door, not through the door itself.
Installation
Entry doors are also known as door systems because they come pre-hung in a frame and are often predrilled for a knob and deadbolt. Unless a replacement door is part of a larger remodeling project, you may want the new door to be the same size as the old one. Choosing a larger door or adding sidelights means redoing the door framing around the door–a job best left to a contractor. Home centers generally offer installation or referral services. Unless you’re a skilled carpenter, you may also want to hire a pro to install same-size doors.
Keep yourself and your family safe
It takes a quality door lock to deter burglaries and home invasions. Many crooks kick in doors to get in. But unless your door is hollow, it’s not the door itself that lets burglars in. Our tests with a battering ram have shown little difference in strength among door materials. All eventually failed because the doorjamb split near the lock’s strike plate, though we also found that beefed-up locks and strike plates can greatly increase a door’s kick-in resistance.
Some other ways to strengthen any exterior door: Use a lock with a 1-inch-long deadbolt and a reinforced metal box strike. Use 3-inch-long mounting screws so they lodge in the framing beyond the doorjamb. And don’t overlook the door that leads into your house from the garage.
Types
Major door manufacturers such as Therma Tru, Masonite, Peachtree, and Pella offer a wide range of doors made of various materials. Here are the types of doors to consider.
Fiberglass doors
Fiberglass is a practical choice for most people. These doors are available with a smooth surface or, more typically, an embossed wood-grain texture. An edge treatment on some makes them look more like real wood.
Pros: Fiberglass doors resist wear and tear better than steel. They can be painted or stained, are moderately priced and dent-resistant, and require little maintenance.
Cons: They can crack under severe impact.
Steel doors
Steel doors account for about half the market.
Pros: They’re relatively inexpensive and can offer the security and weather resistance of much pricier fiberglass and wood doors. Steel doors require little maintenance–unless dents are a part of your home scenario. They’re energy-efficient, though adding glass panels cuts their insulating value.
Cons: Steel doors didn’t resist weather as well as fiberglass and wood doors in our abuse tests and the laboratory equivalent of torrential rain, strong winds, and a decade of wear and tear. And while they’re typically low-maintenance, dents are hard to fix, and scratches may rust if they aren’t painted promptly.
Wood doors
Manufacturers offer dozens of options for panel and glass designs, grille patterns, sidelights, and transoms. The more elaborate the design, the more the door will cost. Here are the door features to consider when shopping.
Adjustable threshold
This helps keep any door weather-tight over time. Otherwise, you may eventually need to add a new sweep to the bottom to seal out rain and drafts.
Glass
Glass inserts are attractive, but they add to the cost. If you’re buying a door with glass near the doorknob or with glass sidelights, consider a double-cylinder dead-bolt lock. You need a key to open this type of lock whether you’re inside or outside, so a burglar can’t simply break the glass and reach in to open the door. Some municipalities ban double-cylinder locks since they may make it harder to get out in an emergency; check with your building department, and always leave a key within arm’s reach of the interior lock. Glass inserts also cut the door’s insulating value, though double- or triple-panel glass reduces that effect.
Rails and stiles
These are the horizontal and vertical parts that brace a wood door. Solid-wood rails and stiles may eventually bow or warp. Look for rails and stiles made of laminated wood covered with veneer, which provides the greatest resistance to warping.
